Posted  by  admin

Vmware Tools Iso Download Linux Guestmilkwestern

It is recommended that you use Open VM Tools in Linux virtual machines.

When you right click a virtual machine and select Install VMware Tools all it does is mount an ISO from the ESX Server, which has the installer for the tools on it. Therefore no internet is needed for this operation. I also agree with RParker, I recommend having the same version of the tools as the version of ESX you are running. The final step is to download the VMware Tools ISO image or the VMware Tools.exe file (depending on which file is available in the folder). Now, you are ready to start the VMware Tools installation. Simply copy the ISO image file (that you’ve just downloaded) to your file server and start installing VMware Tools without using VMware UI. VMware Tools releases have been decoupled from vSphere release since version 10.0 – you can now standardise on a single release of VMware Tools by configuring a centralised repository. This also allows you to deploy the image of ESXi without VMware Tools integrated. To download OSPs and to find important information and instructions, see VMware Tools Operating System Specific Packages (OSPs). For a list of supported guest operating systems, see VMware Compatibility Guide. Open-vm-tools (OVT): This is the open source implementation of VMware Tools intended for Linux distribution maintainors and virtual.

For more information about Linux distributions supported by Open VM Tools, see and the VMware Compatibility Guide at

Note: In some Linux distributions, the VMware Tools CD icon may fail to appear when you install VMware Tools within an X windows session on a guest. In this case, you should continue installing VMware Tools as described in Installing VMware Tools from the Command Line with the Tar Installer, beginning with step 3.

VMware Tar Tool for Linux virtual machine is feature-frozen at version 10.3.10, so the tar tools (linux.iso) included in Workstation Player is 10.3.10 and will not be updated. Due to this change, the Install/Update/Reinstall VMware Tools menu is disabled for the following Linux virtual machines:
  • Modern Linux distributions not officially supported by tar tools.
    • Red Hat Enterprise Linux 8 and later releases.
    • CentOS 8 and later releases.
    • Oracle Linux 8 and later releases.
    • SUSE Linux Enterprise 15 and later releases.
  • Linux kernel version is 4.0 or later, and the version of the installed Open VM Tools is 10.0.0 or later.
  • Linux kernel version is 3.10 or later, and the version of the installed Open VM Tools is 10.3.0 or later.

For the Linux virtual machines that have Open VM Tools installed but are not in the scope mentioned in the preceding bullet, Install/Update/Reinstall VMware Tools menu is enabled, so that you can install bundled tar tools on top of Open VM Tools to get Shared Folder (HGFS) feature support.

For old Linux virtual machines not supported by Open VM Tools, perform the following steps to install tar tools.

  • Power on the virtual machine.
  • Verify that the guest operating system is running.
  • Because the VMware Tools installer is written in Perl, verify that Perl is installed in the guest operating system.
Download vmware tools iso for linux
  1. On the host, from the VMware Fusion menu bar, select Virtual Machine > Install VMware Tools.
    If an earlier version of VMware Tools is installed, the menu item is Update VMware Tools.
  2. In the virtual machine, open a terminal window.
  3. Run the mount command with no arguments to determine whether your Linux distribution automatically mounted the VMware Tools virtual CD-ROM image.
    If the CD-ROM device is mounted, the CD-ROM device and its mount point are listed in a manner similar to the following output:
  4. If the VMware Tools virtual CD-ROM image is not mounted, mount the CD-ROM drive.
    1. If a mount point directory does not already exist, create it.
      Some Linux distributions use different mount point names. For example, on some distributions the mount point is /media/VMware Tools rather than /mnt/cdrom. Modify the command to reflect the conventions that your distribution uses.
    2. Mount the CD-ROM drive.

      Some Linux distributions use different device names or organize the /dev directory differently. If your CD-ROM drive is not /dev/cdrom or if the mount point for a CD-ROM is not /mnt/cdrom, modify the command to reflect the conventions that your distribution uses.

  5. Change to a working directory, for example, /tmp.
  6. (Optional) Delete any previous vmware-tools-distrib directory before you install VMware Tools.
    The location of this directory depends on where you placed it during the previous installation. Often this directory is placed in /tmp/vmware-tools-distrib.
  7. List the contents of the mount point directory and note the file name of the VMware Tools tar installer.
  8. Uncompress the installer.

    The value x.x.x is the product version number, and yyyy is the build number of the product release.

  9. If necessary, unmount the CD-ROM image.

    If your Linux distribution automatically mounted the CD-ROM, you do not need to unmount the image.

  10. Run the installer and configure VMware Tools as a root user

    Usually, the configuration file runs after the installer file finishes running. If you attempt to install a tar installation over an RPM installation, or the reverse, the installer detects the previous installation and must convert the installer database format before continuing.

    Note: For newer Linux distributions, users are prompted to choose the integrated open-vm-tools.
  11. Follow the prompts to accept the default values, if appropriate for your configuration.
  12. Follow the instructions at the end of the script.

    Depending on the features you use, these instructions can include restarting the X session, restarting networking, logging in again, and starting the VMware User process. You can alternatively reboot the guest operating system to accomplish all these tasks.

If a new virtual hardware version is available for the virtual machine, upgrade the virtual hardware.


This content is no longer maintained. It has been left here in case itcan help someone, but it will not be maintained and will eventually moveout of date. If you choose to use a Virtual Machine to host yourdevelopment version of Linux on a PC, the VM provider will provide up todate information that is better and more complete than what we’veprovided here.


This guide demonstrates how to get a virtual Ubuntu Linux machinerunning with VMware under Windows 7. Please use only the 32-bit Ubuntu14.04 release as this is what is called an LTS (Long Term Support).There are SDK scripts that will be checking for this release identity.


  • Windows 7 host with internet connection, at least 1G of RAM and 40Gof free hard drive space.

The instructions here are for setting up a 40G virtual machine. Theentire 40G is not taken at once, but as the machine is used and softwareis installed, the machine can grow and take up as much as 40G.

Download the Ubuntu 14.04 LTS ISO image


Get the Ubuntu 14.04 LTS CD ISO image from: Select PC (Intel x86) desktop CDunder the Desktop CD section.

Click download and the follow instructions to download and save the ISOimage somewhere. Remember where you save this - you will need the ISOsoon!(CD image).

Download VMware and install

Get VMware from:

Vmware Player is a free download from the website and enables the userto create an entire virtual machine from scratch using just the ISOimage downloaded from Ubuntu. It is necessary to sign up for an accountat VMware in order to get to the download areas. The general steps togetting VMware are as follows:

  • Login to the vmware website
  • Select VMware Player from the products menu
  • Follow the steps to download VMware Player

NOTE - We have tested with v7.0.0 with no known issues. As ofFeburary, 2015, v7.0.0 is the latest version.

  • Run the executable to install VMware
  • Accept license and all default settings.

Create a New Virtual Machine with VMware

Before starting a new installation it is assumed that the Windows hosthas a proper internet connection to a DHCP server and that the Windowshost has enough hard drive space for the new virtual machine.

The following steps are performed with VMware 7.0.0. The exact stepswith other versions may vary slightly

  • Start VMware.
  • From the File menu select “Create a New Virtual Machine…”
  • Choose to install the operating system later. Click “Next”.
  • Select Linux as the “Guest Operating System” and then choose Ubuntuas the “Version”. Click “next”.
  • Provide a “Virtual machine name” and “Location” where the machinewill be stored on the Windows host. The defaults are fine here.Click “Next”.
  • For “Maximum disk size (GB)” it is good to start with 40G ifpossible. This means that it will take up 40G on the Windows host.Make sure that the Windows host has at least this much beforeproceeding. It is also a good practice to tell VMware to split thevirtual disk into 2G files. This will makes the image easier to copyand transport if necessary. Click “Next”.
  • Click “Finish” to complete the creation of the virtual machine.

The machine name will now be listed under the home page of VMware. It isnecessary to modify some machine settings before playing the machine forthe first time. Select the machine in the home page and then click on“Edit virtual machine settings” on the right.

Click on CD/DVD and change the connection to “Use ISO image file”. Clickon “Browse…” and select the Ubuntu ISO image file that was previouslydownloaded. Click on Network Adapter and change the Network connectionto “Bridged” and then check the box to “Replicate physical networkconnection state”.

Adding a serial port to the virtual machine


If you plan to use a serial terminal application, a serial port must beadded to the virtual machine. This port must be a physical serial portwhich exists on the host PC. Click on “Add…” and select “SerialPort”. Click “Next”. Choose “Use physical serial port on host”. Click“Next”. Click Finish. Click “Ok”.

Since this is a physical port on the host PC, it cannot be used by thehost PC and the virtual machine at the same time. When the virtualmachine is started, the serial port will be unavailable for use by thehost PC. If the serial port is being used at the time that the virtualmachine is started, the virtual machine will not be able to access theserial port after it is booted up. So if you want the virtual machineto gain control of the physical serial port of the host PC, there cannot be any application like hyperterminal or teraterm running on thehost PC at the time that the virtual machine is started.

Further instructions for using the serial port with minicom inside ofUbuntu arehere.

Minicom is the preferred application for use with the Sitara SDK. Andthe installation and setup of minicom is done automattically by theSitara SDK installer.

Now click on “Play virtual machine”. Since this is the first timestarting the machine and the Ubuntu ISO image is in the virtual CDdrive, the Ubuntu OS will install itself in the virtual machine.

Vmware Tools Iso Linux

Click through the Ubuntu installation, making the appropriate choices asyou go. This will help with SDK installation scripts.

The full installation will take 20-30 minutes. When it completes themachine will reboot. The machine will now prompt for the username andpassword that you created during the installation.

After the machine reboots into Ubuntu it is helpful to take the UbuntuISO out of the virtual CD drive. Click on the VM menu and select“Settings…”. Click on CD/DVD and change the connection from “UseISO image file” to “Use physical drive”. The actual drive letter can beselected from the drop down list. If there is no physical drive on thehost machine, the CD/DVD device can be simply removed from the machine.

Install VMware Tools

VMware tools is a very useful addition to VMware. It allows you toresize the VMware screen ,cut-and-paste of text and drag and drop filesfrom the Ubuntu machine to and from the Windows host.

Within the virtual machine window click the Player -> Manage ->Install VMware Tools

The VMware tools are contained in an ISO image that VMwarewill automatically mount. This drive will show up on the Ubuntudesktop as if it were a disk in a DVD drive.

There will be a single tarball on the drive namedVMwareTools-9.9.0-2304977.tar.gz (or with a slightly different versionnumber). Extract the tarball somewhere in your /home/<user>directory. You will see that a vmware-tools-distrib folder wascreated and a file name inside. to install VMware Tools. The Perl script must beexecuted as a super-user. This is done in Ubuntu by pre-pending thecommand with “sudo”. When prompted for a password, enter thepassword for the user account. In Ubuntu, there is no “root”account. However, the first user account created when Ubuntu isinstalled can become a super-user with the “sudo” command. Select allof defaults during installation of VMware Tools.

An example is shown below.

Confirming a Valid Network Connection

After logging into the machine for the first time, bring up a terminalwindow. This can be found under the Applications menu in Ubuntu.Applications –> Accessories –> Terminal. Type pwd in thisterminal. This should return /home/<user>. Now type ifconfig.This should return information about the network connection. Undereth0 the IP address should be similar (but not the same) as the IPaddress owned by the Windows host.

How to Read a USB SD Card Reader in VMware

Download Vmware Tools Iso For Linux

Sometimes there will be a need to connect a SD Card to the VirtualMachine (for example, to run the create SD card script provided withthe SDK that partitions, formats, and populates a SD card that can beused with a target board). When a USB card reader with an SD card isinserted into the USB slot of the host machine, the virtual machinewill automatically detect the drive and mount partitions from the SDcard, making the card available to Linux running in the virtualmachine.
If this does not happen automatically (i.e. the SD card cannot beaccessed from the Linux VM), it can be done manually by clicking thePlayer menu -> Removable Devices and then selecting the card reader.From this sub-menu it is possible to connect or disconnect the USBcard reader.