Posted  by  admin

Gm Tech2 Clone Feedback Pros And Consauto Diagnostic Tool

The Tech2 clone review: China GM Tech2 is cheap, also works great, and is of the same build quality as the original, All the Bi-directional actuators work fine. The graphs and tables of PID's look good. Can read the ABS, SIR, and body modules ok. It came with a 2014 data set already installed, and while I may have to order updates from China. Tech2 Diagnostic Scan Tool For GM SAAB OPEL SUZUKI Holden ISUZU With 32 MB Card And TIS2000 Software Carton Package Tech 2 for GM is Professional GM Diagnostic Scan Tool. Part 1: GM MDI or Tech 2 Tech 2 scan tool has become obsolete for shop use as of late. It still has a lot of capability and will do anything you need for the older platforms but it needs the CANdi module to.

gm tech 2 scanner china with multi-languages, TIS2000 Programming CD, CANDI interface, update via 32MB Card, multi car model software to choose,Support GM,SAAB,OPEL,SUZUKI,ISUZU and Holden. One GM Tech II Scanner can be used on all GM vehicle applications.Consauto

Autel Autolink AL619 OBD2 Scanner ABS SRS Airbag Warning Light Scan Tool, Turn Off Check Engine Light Car Diagnostic Tool, Quick Test Engine System Code Reader 4.5 out of 5 stars 2,186 $102.99 $. Gm tech2 scan tool clone vs legit 1. GM Tech2 scan tool clone VS legit I have an original Tech2 scanner already and when I saw another forum member talking about getting a GM Tech2 Scanner for $329 and I was pretty skeptical, but after he posted that it was working fine, I had to try one.

GM Tech2 Professional GM Diagnostic Tool for GM vehicles.It supportsall GM systems from 1992 to 2014.

GM Tech2 Scanner specification:
1) Dimensions: 12
2) Microprocessor: 32 bit,16 MHz
3) Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
4) Communications: Integral RS232 communication port.
5) Screen: 3.8.8 backlit monochrome with full graphics capability: 320,40 pixels. Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 Mb)
Pros

GM Tech2 Features:
1) Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
2) Support for on-board diagnostics on all GM systems 1992 thru 2011.
3) Removable hardware modules provide insurance against scan tool obsolescence.
4) Large, easy-to-read backlit screen.
5) RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6) Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7) Ability to view the status of vehicle diagnostic tests as they run.
8) Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.

For GM-English 33.004 1991-2014 (Newest software)
For GM-Spanish 32.008 1991-2013
For GM-Japanese 32.006 1991-2013
For GM-Thai 32.008 1991-2013
For GM-Portuguese 32.008 1991-2013
Gm tech2 clone feedback pros and cons auto diagnostic tool repair
For OPEL-English 1997-2014 165.000 (Newest software)
For OPEL-Germany 85.001 1997-2008
For SUZUKI-English 01.210.020
For SAAB
For ISUZU-English 107.021
CAN-BUS: 2010- (CAN-BUS support car models after 2010)
K-line: 1996-2011 (K-line support car models from 1996 to 2011)
For HOLDEN-English 149.000 1999-2013
05 Buick Allure (3.6L)
05 Buick LaCrosse (3.6L)
05 Buick Rainier (5.3L)
04-05 Buick Rendezvous (3.6L)
04-05 Cadillac CTS (3.6L)
04-05 Cadillac SRX (3.6L / 4.6L)
04-05 Cadillac XLR (4.6L)
05 Cadillac STS (3.6L / 4.6L)
05 Chevrolet Cobalt (2.2L)
05 Chevrolet Corvette (6.0L)
05 Chevrolet Equinox (3.4L)
05 Chevrolet TrailBlazer (5.3L)
05 Chevrolet SSR (6.0L)
04 Chevrolet Malibu (Body/Chassis only)
05 Chevrolet Malibu (3.5L)
05 GMC Envoy (5.3L)
05 Pontiac G6 (3.5L)
05 Pontiac GTO (6.0L)
05 Pontiac Pursuit (2.2L)

GM Tech2 Clone

http://www.wobd2.com/wholesale/gm-tech2.html

How to use GM TECH2 Diagnostic Scanner




Other Relation GM Tech2 :

For program a module with GM Tech2 scan tools,there are two methods. One is pass-through and the other is using the Tech 2 as a go-between.
1.The pass-throughis to use with a laptop in the vehicle and it just uses the Tech 2 as the connection between. This is the fastest and easiest way to do it.
That is, the data are directly downloaded from the PC to the ECU in the vehicle.
Although the GM Tech 2 is still necessary in the mode, the data entry and the download control is done directly at the pc. Altogether, the method is faster, and it is recommended when a pc with TIS2000 software is within 3m of a vehicle.
  1. Connect Tech 2 to the vehicle.
  2. Connect Tech 2 to the PC switch on Tech 2.
  3. Start TIS 2000 on the PC.
  4. Select the icon ‘Service Programming System’ (Fig. 1) on the TIS2000 start page.
  5. Start TIS 2000 on the PC.
  6. On the screen ‘Select Diagnostic Tool and Programming Process’ (See picture below) make a selection for
***the reprogramming of an ECU that was not exchanged or the replacement/programming of a new ECU
***the ECU location.
2.The go-between method is for when you can’t bring the computer into the vehicle and uses the gm Tech2 scanner as a go-between. You connect the Tech 2 to the vehicle and download the module information that you want to program. Then you disconnect, run to the computer running Tis2000, connect it to the computer and download the programming information for that module, disconnect again and run back to the vehicle, connect it and it automatically programs the module. It can take a long time depending on the module (PCM is the longest).

Gm Tech2 Clone Feedback Pros And Consauto Diagnostic Tool

Have fun in GM Tech II programming!

Gm Tech2 Clone Feedback Pros And Cons Auto Diagnostic Tool Repair

Related posts: