Posted  by  admin

Bluetooth Driver Windows 7 32bitcorporationwestern

  1. Bluetooth Driver For Windows 7 Free Download
  2. Bluetooth Driver Installer 64 Bit
  3. Bluetooth Driver Windows 7 Download
Quick Navigation

What Bluetooth Devices Are Compatible with Windows 7?

  • A Bluetooth Driver refers to a software program that allows your operating system to connect with a Bluetooth device and vice-versa. Bluetooth Device Drivers are designed for the specific use of Bluetooth Device, so it can be different to choose the Bluetooth driver on Windows 7, 8 and 10. Operating system and device specific.
  • Microsoft Bluetooth Device Driver 2013-06-21 Microsoft Bluetooth Device Driver 9.1.496.0 for Windows 7 x64 2012-10-26 Microsoft Bluetooth Device Driver 2012-10-17.

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

If you have any Bluetooth-based device, it should be compatible with your Windows 7 computer system. As long as your computer has Bluetooth built-in, which it likely does, it will connect with your wireless device. Now, there are exceptions, but this is on a device to device basis, so it's difficult to identify one specific device that might not work with your computer.

This is because it may depend on the version of Bluetooth your computer has installed, the manufacturer of your computer, and the Bluetooth version and manufacturer of the device you wish to connect. Realistically though, after you go through the Windows 7 Bluetooth setup, you'll find nearly all devices will connect.

Whatever kind of device you have if you go through these steps for connecting a Windows 7 Bluetooth to your wireless equipment and it does not work, chances are the two devices are not compatible. If you should find this is the case, go to the manufacturer's website of your device and look for any available patch or firmware downloads. Some downloads may be available to allow your computer to connect with the device should your computer not identify it right away. In all likelihood though, you shouldn't have to go that route at all.

Is There a Need for Installing Additional Software?

In general, no, there is no need for installing additional software if you want to take advantage of the Windows 7 Bluetooth feature. This is different from how computers used to be when you needed to download and install specific firmware for the device you wanted to connect. With a Windows 95 or Windows XP computer, even if you were connecting via a USB or other data cable, you often had to connect the devices and then install a provided firmware file that informed your computer how to connect with the device. Bluetooth does not require you to do this.

One of the main benefits with Bluetooth over other connection methods (such as over Wi-Fi) is how the data transfer takes place. With a Wi-Fi connection, the computer might detect another device, such as a printer, but it may still need to download a firmware patch to inform the computer how to work with the device over Wi-Fi. Thanks to how Bluetooth works, you can turn it on and you'll be good to go. As long as you follow the steps for activating your Windows 7 Bluetooth you will be able to take advantage of the wireless technology.

Avantree DG40S USB Bluetooth Adapter for PC, Bluetooth Dongle for...

How to Easily Install and Setup a Windows 7 Bluetooth Device

When performing the Windows 7 Bluetooth setup it shouldn't matter which computer manufacturer you're using. All of these configurations should be the same as all are running Windows 7. You may find there are differences, although minor (these changes are likely due to slight variations in Windows 7 releases). In general, as long as you follow these Windows 7 Bluetooth instructions you'll be able to sync your Bluetooth devices up without any problems.

The instructions for setting up your Bluetooth device in Windows 7 is also the same as in Windows 8.1 and Windows 10. So whatever version you're using, if it is one of the later Windows variants, you shouldn't have any problem pairing it with your Bluetooth device.

Bluetooth Driver Windows 7 32bitcorporationwestern

First, you need to turn on your Bluetooth device and make it 'discoverable.' Most devices, such as speakers, headphones, or wireless mice, are automatically discoverable once powered on. Other devices may need to be told to be discovered. For example, if you're pairing a mobile phone with your computer you will need to turn the device on and then turn the Bluetooth feature on. If you're not sure how to turn the Bluetooth feature on over your mobile device, you need to check the owner's manual for the device (or head over to the manufacturer's website and look up this information.

Bluetooth Driver For Windows 7 Free Download

With the device turned on and ready to be connected to your computer, you'll need to click the 'Start' button on your Windows 7 computer. From there, choose 'Devices and Printers.'

This will open up a new window. From the new window, you'll want to choose 'Add a device.' The computer will search for any available Bluetooth devices in the area. Make sure the device you want to connect with your computer is nearby. Once the Bluetooth scan is complete, the computer will display all the available Bluetooth devices it found with its scan. Select the device you want to connect and choose 'Next.'

In some cases, there may be additional steps to pair the devices. Some devices will require you to enter a pairing code (this is especially the case with older Bluetooth devices). Type in the pairing code that came with the device into this activation window on the computer. After you enter the code, the computer will sync the devices together.

After the pairing is complete, it will always connect the two devices together, so you will not need to move into this Bluetooth pairing feature later on. Just turn the device on and your Windows 7 computer will automatically detect it.

Plantronics 202340-21 Explorer 50 Bluetooth Headset - Retail Packaging...

If you decide to upgrade to Windows 8.1, or you purchase a computer running 8.1, there are a few variation steps you'll need to perform. So while you now know how to use the Windows 7 Bluetooth feature, it does help to know how to use these steps on Windows 8.1

Windows 7 x64 bluetooth driver

As is the case with Windows 7, you'll click the 'Start' button. However, this time you'll type 'Bluetooth' into the search bar and then choose 'Bluetooth Settings.' You will now need to tell the computer to turn the Bluetooth feature on. This activates the Bluetooth scan for available devices. Once it detects your device, you need to click 'Pair' to complete the process (again, some devices may require you to enter a pairing code, but in general, the process will end here).

Bluetooth Driver Installer 64 Bit

If you're running a Windows 10 computer there likely are a few changes to how the system works. If you have upgraded your older computer to run Windows 10, then you probably don't need these steps. However, if you purchased a new computer with Windows 10, the pairing process can differ slightly based on the hardware built into the computer, so knowing these steps can be helpful.

First, you'll need to turn your computer's Bluetooth feature on. There might be a button you press to turn Bluetooth on from the keyboard. If this is not an option, click 'Action Center' from the taskbar and then choose 'Bluetooth' (you will also see the Bluetooth logo, which is a hard-lined 'B' shape).

The Action Center logo looks like a squared-off conversation box (such as the kind you would see in a comic book). This is in the lower-right corner of the computer screen. When you click on it a number of options will appear on the right side of the screen. You can then choose to 'Connect' and then select the Bluetooth device you want to be paired with your computer.

Should you not have this option in the Action Center, you'll need to click the 'Start' button, then choose 'Settings,' 'Devices, and 'Bluetooth and other devices.' Inside this window, choose to turn on Bluetooth. The computer will now scan for any available Bluetooth devices in the area.

Bluetooth Driver Windows 7 Download

Once the computer identifies the Bluetooth device you need, click on it and the computer will automatically pair with it. As is the case with the other kinds of Windows operating systems, if you need to enter a pairing code, you'll be requested to do so now. Entering the pairing code will complete the process.

No products found.

Bluetooth is a beneficial technology that makes it easy for you to connect wireless devices to your Windows computer. Bluetooth has been available on Windows computers dating back to Windows XP, so if you're running Windows 7, you shouldn't have any issue connecting devices with the computer. All it takes is learning how to turn the Bluetooth features on and syncing the devices together.

Once you learn how to do this, you'll be able to connect future Bluetooth devices to your computer and, best of all, once you pair the device, you won't need to perform the confirmation code or other pairing procedures ever again. The devices will automatically pair without any further requirements.

Last update on 2021-01-21 at 19:15 / Affiliate links / Images from Amazon Product Advertising API


What is the Bluetooth File Transfer Wizard?

The Bluetooth File Transfer Wizard enables users to transfer files between a computer and a Bluetooth device. For example, users can transfer files between a computer and a mobile phone or a personal digital assistant (PDA). The Bluetooth File Transfer Wizard can also transfer files between two computers that support Bluetooth.

Note The default GUI that the Bluetooth File Transfer Wizard uses is implemented in the Fsquirt.exe file. This file can be unhooked from the underlying transfer wizard mechanism to enable replacement of the default Bluetooth File Transfer Wizard GUI. For more information, see the following question.

How do I unhook Fsquirt.exe?

Software developers that desire to replace the in-box Bluetooth File Transfer Wizard with a proprietary application can unhook Fsquirt.exe from the underlying transfer wizard mechanism by performing the following steps:

  1. Create a DWORD value that is named DisableFsquirt under the HKLMSystemCurrentControlSetServicesBthportParameters key in the registry.
  2. Set the value of DisableFsquirt to 0x1
  3. Either reboot or run the following command in a command prompt window: fsquirt.exe -UnRegister

To re-enable Fsquirt.exe, perform the following steps:

  1. Delete the DisableFsquirt value from the registry.
  2. Reboot or run the following command in a command prompt window: fsquirt.exe -Register

In Windows Vista, why does the Bluetooth notification area icon sometimes disappear?

In Windows Vista RTM and Windows Vista with SP1, the Bluetooth notification area icon appears when the Bluetooth radio is connected to the computer. The icon is configured to stay active for up to 10 minutes, but after that period the icon disappears from the notification area.

If users want a persistent Bluetooth notification area icon, they can select the Show the Bluetooth icon in the notification area check box on the Options tab of the Control Panel Bluetooth Settings application.

Bluetooth drivers for windows 10

Note Even if no Bluetooth icon is in the notification area, you can still use the Control Panel Bluetooth Settings application to perform related tasks such as adding new Bluetooth devices, making the computer discoverable, and so on.

Can vendors add tabs to the Control Panel Bluetooth Settings application?

Yes, vendors can add tabs by implementing a shell property sheet handler for the application. For example, IHVs that implement extensions to the in-box Bluetooth stack can implement a property sheet handler that adds tabs for profiles such as file transfer, enhancements added to version 2.1 of the Bluetooth specification, and so on. For more information about how to implement property sheet handlers, see Property Sheet Handlers.

Why does Windows 7 and Windows Vista display a dialog box when a Bluetooth audio device is initially connected?

Windows might not provide default support for headset (HSP), hands-free (HFP), or advanced audio distribution (A2DP) audio profiles. If a Bluetooth audio device is paired with a system that does not have the necessary drivers, Windows typically displays the Found New Hardware dialog box. However, the dialog box does not appear if one of the following is true:

  • The computer’s OEM provided a profile pack that supports Bluetooth audio.
  • The end user previously installed a Bluetooth headset and downloaded the audio drivers from media that the IHV or Windows Update provided.
Bluetooth Driver Windows 7 32bitcorporationwestern

How do I enhance the functionality and better represent my Bluetooth device in Devices and Printers?

You can create a device metadata package for your Bluetooth device so that Devices and Printers displays device-specific information about your device, such as photorealistic icons and custom descriptions. This can significantly improve a user’s experience with your Bluetooth device. For example, you might want to more effectively expose all the features that your device supports. Certain device classes can also take advantage of Device Stage, which enables IHVs to further enhance the device experience by providing a customized and branded device-specific user interface.

For more information about how to create a device metadata package for your device, see How to Create a Device Metadata Package for Devices and Printers.

For more information about Device Stage, see “Device Stage General Development Kit” on the MSDN Web site.

Note To take advantage of Device Stage, the Device ID Profile must be implemented, which includes the Hardware ID, Vendor ID, and PID.